FG-DS-001 / Rev A - Inspection planning worksheet Design example. Units: mm. This worksheet has no measured results. Drawing revision: __________ Part / batch reference: __________ Feature: Main mating diameter Nominal: 16 Limits / fit: __________ Method / equipment / measurement positions: ____________________ Sampling plan: __________ Recorded result: __________ Feature: Locating shoulder Nominal: Shoulder at X=48 from the left end Datum / axial tolerance / face requirements: ____________________ Method: __________ Recorded result: __________ Feature: Overall and segment lengths Nominals: 120 overall; sections 28 / 20 / 44 / 28 Limits / method / sampling: ____________________ Recorded result: __________ Feature: End connection Nominal blank: Diameter 10 x 28. Thread not specified. Thread standard / pitch / fit / usable length / gauge: __________ Acceptance record: __________ Feature: Edges and appearance Nominal: Both external end edges C0.5 Burr / finish / surface protection acceptance: ____________________ Recorded result: __________ Reviewer: __________ Date: __________