FG-DS-001 / Rev A - Inspection planning worksheet
Design example. Units: mm. This worksheet has no measured results.
Drawing revision: __________    Part / batch reference: __________

Feature: Main mating diameter
Nominal: 16    Limits / fit: __________
Method / equipment / measurement positions: ____________________
Sampling plan: __________    Recorded result: __________

Feature: Locating shoulder
Nominal: Shoulder at X=48 from the left end
Datum / axial tolerance / face requirements: ____________________
Method: __________    Recorded result: __________

Feature: Overall and segment lengths
Nominals: 120 overall; sections 28 / 20 / 44 / 28
Limits / method / sampling: ____________________
Recorded result: __________

Feature: End connection
Nominal blank: Diameter 10 x 28. Thread not specified.
Thread standard / pitch / fit / usable length / gauge: __________
Acceptance record: __________

Feature: Edges and appearance
Nominal: Both external end edges C0.5
Burr / finish / surface protection acceptance: ____________________
Recorded result: __________

Reviewer: __________    Date: __________
